Monday, April 26, 2010

How to Fix a Hard Drive Crash ?

All you have to need is a Spare computer Data recovery software Screwdriver and follow the steps below:-

Step 1
Use a screwdriver to remove the screws holding the computer cover in place. Slide off the computer cover and locate the hard drive, which usually looks like a black plastic rectangular box enclosed in a metal casing. The hard drive will be linked to other components by a long plastic ribbon-like cord that has a long interlocking and connecting device attached to it.

Step 2
Remove the metal housing, which should require nothing more than removing some screws.

Step 3
Disconnect the hard drive by pulling the interlocking end of the lock ribbon cord until it comes free.

Step 4
Unscrew anything still holding the hard drive in place, and pull the hard drive unit out of the computer.

Step 5
Install the damaged hard drive into a spare machine as the secondary drive.

Step 6
On the secondary machine's primary drive, install the data recovery software.

Step 7
Fire up the machine and give it time to recovery as much of the data as it can. You won't be able to know the full extent of what was recovered until a few days have passed.



How to Fix a Crashed Hard drive ? 




2 comments:

  1. Very effective video. Your way of explanation is very effective. Hard drive crash is frustrating and if you are not keep that much knowledge then it is completely difficult for recovery. However online sources are one very best solution.

    ReplyDelete
  2. As independent data recovery specialist I recommend the best, safe and most reliable data recovery services for hard drive standards.

    ReplyDelete

Computer help - Blogged