How to Fix a Hard Drive Crash ?

All you have to need is a Spare computer Data recovery software Screwdriver and follow the steps below:-

Step 1
Use a screwdriver to remove the screws holding the computer cover in place. Slide off the computer cover and locate the hard drive, which usually looks like a black plastic rectangular box enclosed in a metal casing. The hard drive will be linked to other components by a long plastic ribbon-like cord that has a long interlocking and connecting device attached to it.

Step 2
Remove the metal housing, which should require nothing more than removing some screws.

Step 3
Disconnect the hard drive by pulling the interlocking end of the lock ribbon cord until it comes free.

Step 4
Unscrew anything still holding the hard drive in place, and pull the hard drive unit out of the computer.

Step 5
Install the damaged hard drive into a spare machine as the secondary drive.

Step 6
On the secondary machine's primary drive, install the data recovery software.

Step 7
Fire up the machine and give it time to recovery as much of the data as it can. You won't be able to know the full extent of what was recovered until a few days have passed.

How to Fix a Crashed Hard drive ? 

Fix Rundll32.exe

In order to solve the problem, it is often necessary to go through a series of possible solutions or fixes to the problem. The first and most basic step is to do a simple reboot of your computer. If this does not seem to solve the problem, continue to the next possible fix.

If the rundll error has occurred because of a faulty uninstall, the next thing to do is to completely redo the uninstall. How do you know if this is the problem? Actually, you don't, but you can consider it, if you recently attempted to uninstall a program. To uninstall the program again, you will first need to reinstall it. Now, carefully perform a new uninstall of the program. If this solves the problem, you are in the clear. If not, continue troubleshooting.

If you have an up to date anti-spyware application, run it now. Since spyware, adware, and malware are constantly evolving into newer and more insidious versions, it is extremely important to maintain a current version. If the rundll errors continue to occur, attempt to do a clean boot.

Complete the following steps in order to perform a clean boot on your computer.

• Click start to open the menu.
• Click run
• Type "msconfig" in the input field.
• Click ok. The System Configuration Utility should open.
• Once the System Configuration Utility opens, choose the selective startup option by clicking in the small circle in front of it. Deselect all but one choice listed below it. It doesn't matter which one, because you will need to do this until you have covered each one of the choices.
• Click ok.
• Reboot your computer
• Once this process identifies the item that is at the root of the rundll problem, you move to the next step. Select the tab at the top of the System Configuration Utility Window that corresponds to the item that has been identified.
• Deselect all but one of the choices below the tab.
• Reboot your computer. If the computer reboots without any problems, continue the process of elimination. Deselect different scenarios until you identify the problem. Reboot.
• Once you identify the problematic item, you are finished with this procedure.

How to Fix Missing NTLDR and Ntdetect.com files

Follow the steps to fix the error:-

Step 1
Insert the Windows installation CD into the computer's drive and reboot the machine. When the Machine starts a message displayed " press any key to boot."

Step 2
Now click the "R" key to choose "Recovery Console." option and then select the Windows installation that is required to be fixed. This is only mandatory if there are more than one version of Windows installed on the machine. For most users, clicking "1" selects the version of Windows installed.

Step 3
Now enter the administrator's password into the command prompt. After the password is entered, you are given a Windows command prompt where the NTLDR and ntdetect.com files are restored.

Step 4
After that type the following statements into the command prompt:

xcopy x:\i386\ntdetect.com c:
xcopy x:\i386\ntldr c:

and then press "Enter" key.

Note:- Replace "x" with the drive letter of your CD drive and replace "C" with the drive location for the Windows installation.

Step 5
Remove the boot disk and reboot your machine. Windows boots and the error are corrected.

How to fix large file copying problems in Windows Vista ?

Vista has a new feature called 'receive window auto-tuning'. In short, this allows Vista to automatically scale the size of each packet of data it requests and receives over a network connection to suit the available bandwidth. Sometimes, older networking hardware may have issues with this new technique and refuse to co-operate, leading to dropped file transfers, slow performance and other weird problems.

If you are experiencing network issues with large file transfers and occasional connection problems with applications like Messenger, you can restrict or disable the receive window auto-tuning feature.

To do this, open a command prompt window with administrative privileges To run a program with Administrative rights:

1)Type the name of the program “cmd” in the 'start' menu searchbar.

2)Right click on the program's icon “cmd” in the search results and choose 'run as administrator.'

3)Now in the cmd type 'netsh interface tcp set global autotuninglevel=restricted' and press Enter.

If this fixes your issues, relax. If you continue to have networking problems, open another administrative prompt and type 'netsh interface tcp set global autotuninglevel=disabled'.

source:-http://hubpages.com/hub/windows-xp-vista-tips-and-tweaks

How To Backup Email Accounts in Outlook, Outlook Express & Windows Mail

Outlook 

With Microsoft Outlook Support there is a backup tool that is free for download, and you download it to your personnel computer, then run and uninstall it. It installs right into Outlook, and then you go to File>Backup and just follow the prompt. There is even an option to choose where the backup goes. You can back it up to another hard drive, CD or over a network.

This tool works great and does it pretty fast (depending on how much email you have) This tool will work on Outlook 2002, 2003, 2007. For more help on using this handy tool click here.

Outlook Express

Outlook Express is notas easy. There are several steps, and they are outlined in this document from Microsoft. The process is not hard, but not as straight forward as Outlook. First you locate the "Store" folder, where your email is stored for that account. Then you copy the contents of that folder to a new backup folder. All a bit manual, but all doable if you follow the instructions in the above document.

It also shows you how to save your address book.

Windows Mail

Vista does not come with Outlook Express, but it has Windows Mail. It looks and acts pretty much like Express, but it has been Vistaized. It looks oh so pretty. Vista has a File Backup utility built into the Operating System. If you go to Control Panel>System Maintenance on some versions, and Control Panel>Backup and Restore Center. It allows you to back up your data, your email, photos, and other various choices. It is pretty good, and finally built into Windows. Windows 7 will also have these features from what we have been told.

Computer problems

Computer problems are deeply associated with developing IT industry. Most generic computer problems are often linked with system performance and corruption of operating system. So let's have a look at some of the etiquettes and troubleshooting method to deal with computer problems. If you have Windows XP operating system, then you might be aware of the Desktop cleanup Wizard. The feature of this tool is to remove unused icons from the desktop on the regular basis, this in turns improves the system performance. User can easily enable this Desktop cleanup Wizard from the below steps.

STEP 1. Right-click over the desktop and select Properties.

STEP 2. From the Display Properties dialog box select the Desktop tab.

STEP 3. Select "Customize Desktop."

STEP 4. In the Desktop Items dialog box clear the Run Desktop Cleanup Wizard every 60 days check box.

STEP 5.Click OK to close the dialog boxes

Sometimes your operating system may not be working properly. You may face boot issue issue. To handle this computer problem user have to make an attempt to repair the operating system.

This can be performed with the help of Windows XP Installation CD. Follow the below steps:

STEP 1. Restart the computer with the Windows Installation CD.

STEP 2. Press Enter when you got the message" To setup Windows XP now appears."

STEP 3. Press Enter when you get Welcome screen of Setup.

STEP 4. Press F8 to agree against the Windows XP Licensing Agreement.

STEP 5. Press R to repair Windows XP.

STEP 6. Follow the repair installation instruction.

Unable to get logon on the computer Windows is another serious computer problem. This may happen due to invalid registry entry as a consequence of some virus or spyware attack. User can address this computer problem with the below mention steps.

STEP 1. Restart the computer and Boot into safe mode.

STEP 2. Click Start, Run and enter regedit into the text box. Hit Enter.

STEP 3. Click on the + sign against, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft \Windows NT\CurrentVersion\Winlogon

STEP 4. Choose the Winlogon folder.

STEP 5. Check the right-hand pane which contains an entry named OldUserinit:

STEP 6. Delete Userinit.

STEP 7. Now rename OldUserinit to Userinit.

STEP 8. Check that the value of Userinit is "C:\WINDOWS\system32\userinit.exe," (the comma at the end of the string is important.)

Important: Modify the path if your Windows folder is not C:\Windows.

How to clean and speed up your computer for free.

How to fix svchost.exe application error ?

Verify and Configure your Windows Update Service Settings

Step 1
Click on the Start button at the bottom left-hand corner of your desktop. Once the Start menu opens, click Run and then type "services.msc" in the text field. Click OK when you are done.

Step 2
Navigate to the Automatic Updates service in the right-hand pane and then double-click on it. Select the Log On tab. Make sure that Local System Account is selected as the default logon account.

Step 3
Uncheck the option "Allow service to interact with desktop." Now go to the Hardware Profile section, also found under the Log On tab. Enable this service.

Step 4
Click on the General tab. Verify that the start-up type is set to Automatic. If not, use the drop-down menu to select this option.

Step 5
Go to the Service Status section. Click on the Start button to enable this service. Do the same thing for the Background Intelligent Transfer Service (or BITS).

Reconfigure Your Windows Update DLLs

Step 1
Click the Start button and then click Run. Type "cmd" into the text field. Click OK.

Step 2
In the Command Prompt, type in REGSVR32 WUAPI.DLL and hit Enter.

Step 3
Wait until you receive a message reading "DllRegisterServer in WUAPI.DLL succeeded."

Step 4
Repeat this process for each of the following commands; type in each command and hit Enter after each line:

REGSVR32 WUAUENG.DLL
REGSVR32 WUAUENG1.DLL
REGSVR32 ATL.DLL
REGSVR32 WUCLTUI.DLL
REGSVR32 WUPS.DLL
REGSVR32 WUPS2.DLL
REGSVR32 WUWEB.DLL

Delete the Corrupted Windows Update Files


Step 1
Type the following command into the command prompt and press Enter: net stop WuAuServ. Type in: cd %windir% and hit Enter.

Step 2
Now type in: ren SoftwareDistribution SD_OLD. This will rename the SoftwareDistribution folder.

Step 3
Restart the Windows Update service by inputting the following command: net start WuAuServ.

Step 4
Type in: Exit and then hit Enter to close the Windows Command Prompt.

Step 5
Reboot your PC. When you restart Windows, you shouldn't receive this error message anymore. If you do, download the two Windows Updates listed below.

source:- www.ehow.com